+91 9100996655

'Z' Purlins | Girts

Pre Engineering Buidings (PEB'S)

Contour Steel engineering India (P) Ltd. provides standard, secondary member even profile "Z" roof purlins and "Z" wall girts, as well as custom profiles and girts are cold rolled formed from steel with a minimum yield strength of 345mpa or 50,000 psi sizes range from Z20 to Z300 deep and thickness minimum 1.2mm and maximum 3mm steel used can be galvanized or Bare with online web and flange punching can produce up to 14 meters in length.

Secondary members have two other functions: they act as struts that help in resisting part of the longitudinal loads that are applied on the building such as wind and earthquake loads, and they provide lateral bracing to the compression flanges of the main frame members thereby increasing frame capacity and these Secondary Members used in a PEB's include purlins, side runners, eave struts, fascia channels ,door posts window posts, rafter stays, column stays, base angles, and other Miscellaneous structural parts

SPECIFICATION
STANDARD MATERIAL
SURFACE FINISH
MATERIAL GRADE PURLINS/GIRTS
Z-Sections 1.2 to 3mm
Thk.
Red Oxide/Grey Oxide (Primer)
or Bare
IS2062/10748 Gr2 Equivalent
IS 5986/Fe510 OR
Z120
Z140
Z170
Z200
Z230
Z250
Z300
Pre-Galvanized ASTM A653
Grade SS37/50 Cl I
OR Equivalent

Gallery